Skip to main content
    Back to Products

    Bentonite Powder

    CAS1302-78-9Same-day Muscat · next-day Sohar, Salalah, DuqmSDS + CoA with every batch
    Request a Quote

    Product Overview

    Clay-based drilling mud additive for viscosity control.

    Detailed Description

    Bentonite powder is sodium montmorillonite clay (CAS 1302-78-9) milled to a fine powder, supplied by Global Chemicals LLC in API 13A drilling grade and a technical grade, in 25 kg bags and 1,000 kg big bags from stock in Muscat. The API grade is tested to the API 13A bentonite requirements: a viscometer dial reading of at least 30 at 600 rpm, a yield point to plastic viscosity ratio of no more than 3, a filtrate of no more than 15 mL in the 30-minute test, no more than 4% residue on a 75 µm (200 mesh) sieve, with moisture reported on the certificate of analysis, so a drilling fluid built on it gives predictable viscosity, gel strength and filter cake from the first batch.

    In water-based drilling mud, bentonite does three jobs. It builds viscosity and gel strength so the mud suspends drill cuttings and carries them to surface and holds weighting material when circulation stops. It forms a thin, low-permeability filter cake on permeable formations that limits fluid loss and supports the borehole wall. And it provides the base to which polymers, lignosulphonates and weighting agents are added. Spud muds typically run 50–70 kg of bentonite per cubic metre of fresh water; prehydrate the clay in fresh water for several hours before adding salt or other chemicals, because bentonite yields poorly in saline or hard water, and add soda ash to treat out calcium first.

    Beyond the oilfield, the same clay is the slurry for diaphragm walls, bored piles and horizontal directional drilling, the grout for sealing boreholes and monitoring wells, and the liner material for ponds, lagoons and landfills, where its swelling on contact with water closes the pores of the soil. Geotechnical and water-well drillers use it at lower concentrations for the same filter-cake effect.

    Bentonite is not classified as dangerous goods, but its dust can contain respirable crystalline silica, so wear a dust mask when mixing. Keep bags dry and off the ground, because wet clay swells in the bag and will not disperse. Every lot carries a certificate of analysis, to the API 13A tests for the API grade, and a safety data sheet. Delivery is same day within Muscat, next day to Sohar, 2–3 days to Salalah and Duqm, to the interior drilling locations by arrangement, and by road across the GCC. Request a quote with the grade, tonnage and location.

    Also Known As:

    Bentonite clay, Drilling clay, Montmorillonite, Sodium bentonite, Drilling grade bentonite

    CAS Number:1302-78-9

    Applications & Uses

    Water-based drilling mud formulations
    Viscosity and gel strength control
    Fluid loss control in drilling
    Wellbore stabilization and support
    Filter cake formation
    Geotechnical drilling and grouting
    Diaphragm-wall, bored-pile and HDD slurries
    Pond and lagoon sealing

    Technical Specifications

    API 13A specification grade
    Yield point/plastic viscosity ratio
    3 maximum
    Viscometer dial reading at 600 rpm
    30 minimum
    Filtrate volume
    15 mL maximum (30 min)
    Moisture
    reported on each certificate of analysis
    Residue on 75 µm (200 mesh) sieve
    4% maximum
    Packaging
    25kg bags, bulk bags

    Frequently Asked Questions — Bentonite Powder

    Global Chemicals LLC supplies Bentonite Powder in Oman — API 13A specification grade — available in 25kg bags, bulk bags, with same-day delivery in Muscat, next-day dispatch to Sohar, 2–3 day delivery to Salalah, and export across the GCC. Contact us for current pricing and a Certificate of Analysis.

    Bentonite Powder is commonly used for Water-based drilling mud formulations, Viscosity and gel strength control, and Fluid loss control in drilling. Global Chemicals LLC supplies Bentonite Powder across Oman and the wider GCC with full SDS documentation to support these applications.
    ISO 9001 Certified Fast Delivery Oman & GCC Export

    Comparing grades, pack sizes and delivery options? Oilfield chemicals in Oman — the full range by job

    Read the guide

    Request a Quote

    Get pricing, availability, and technical specifications for Bentonite Powder. Our team responds within 24 hours.

    Related Products

    Multipurpose boron compound for industrial applications.

    View Details

    Weak acid used in chemical synthesis and industrial processes.

    View Details

    Solvent for paints, coatings, and cleaning formulations.

    View Details

    High-density brine for drilling and completion fluids.

    View Details

    Dense brine solution for well completion and workover operations.

    View Details

    Liquid acidizing agent for well stimulation and scale removal.

    View Details